In order to make your choice easier, this ATP® pack has been created for small-sized home cinema rooms and home studios so that real acoustics can be obtained.
You can choose from the two available ATP1® solutions: Standard or Excellence, depending on your needs and aesthetic taste.
These examples of installation, ATP1®, place the acoustic treatment modules bearing in mind the distance between the listener and the speakers, while minimizing the SBIR (Speaker Boundary Interference Response) and the modal emphasis to produce a frequency response as flat as possible in the room.
Give your ears a treat and see how the performance of your sound system improves.
All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.
Where to apply
These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analysis of the rooms.
The simulated and tested rooms are totally empty, and only the referred ATP® acoustic panels are applied.
Construction used with the following characteristics:
Walls: Masonry with painted plaster and a wooden door
Ceiling: 12mm thick plaster
Floor: Natural floating parquet
|Trap 30R or Trap 30S 120||8||-||Yes|
|Trap 30R or Trap 30S 120||8||Yes|