ATP3 is a combination of acoustic panels designed for medium sized rooms which are generally the more common size of listening room.
You can choose from the two available ATP3® solutions: Standard or Excellence, depending on your needs and aesthetic taste.
Beside using absorption and diffusion panels the ATP® 03 also utilises low-frequency tuned modules, BKA120 and BKW120 as the images show. The presence of acoustic panels in a room helps to enhance, in the most real way, the sound produced by the system thus improving the sound stage and channel separation. The next step is to optimise the coupling between the listener and the speakers while minimizing the SBIR (Speaker Boundary Interference Response) and the modal emphasis to produce a frequency response as flat as possible in the room
Give your ears a treat and see how the performance of your sound system improves.
All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.
Where to apply
These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analysis of the rooms.
The simulated and tested rooms are totally empty, and only the referred ATP® acoustic panels are applied.
Construction used with the following characteristics:
Walls: Masonry with painted plaster and a wooden door
Ceiling: 12mm thick plaster
Floor: Natural floating parquet
|Trap 30R or Trap 30S 120||8||-||Yes||-|