1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes. For more information
Recyclable and made from 68% recycled material fillers
Product Description - Tecsound 100
Tecsound membranes are polymer-based, asphalt-free, high density, synthetic soundproofing membranes, that offer good acoustic insulation in different building elements. The membranes have extremely high visco-elasticity as well as being extremely flexible even in cold temperatures.
This material has excellent sound insulating properties. Many construction materials and techniques do not provide enough damping. Rigid sheet materials such as plasterboard absorb little sound energy because they tend to vibrate and re-radiate sound on the other side quite effectively. However, Tecsound acoustic membrane has tremendous density and mass while remaining extremely flexible. It is acoustically better than lead of the same surface mass, so will help absorb sound energy far more efficiently.
While some systems rely on visco-elastic glues to provide damping the results achieved will vary greatly depending on the application of the glue. Is it too thick? Is it too thin? Has it been applied evenly and consistently?
Visco-elastic glues do not add any extra mass to a system and at the end of the day the best way to reduce bass transmission is by having a heavyweight, heavily damped, mass/spring system. Tecsound acoustic membranes provide the best of both worlds: high additional mass and high damping that can be applied uniformly over 100% of the area to be treated.
Packing and Storage
|Product||Weight / m2||Thickness*||Roll Size*|
|Tecsound 35||3.5||1.7mm||8 x 2.22m rolls|
|Tecsound 50||5||2.6mm||6 x 1.2m rolls|
|Tecsound SY50||5||2.6mm||6 x 1.22m rolls|
|Tecsound SY70||7||3.5mm||5 x 1.22m rolls|
|Tecsound 100||10||5.2mm||4 x 1.2m rolls|
|Tecsound SY50-ALU||5||2.6mm||6 x 1.22m rolls|
|PLEASE NOTE: 1m2 of material covers approx. 0.9 - 0.95m2 allowing for over laps. *sizes are nominal, ±2%|
For further information see examples in systems sheets.
Which way round?
The material has a reinforcing scrim facing on one side. When stapling over a framework you want the scrim side facing you. When laying on a floor have the scrim side facing you. When using multiple layers you may find the material will want to tack to itself so keep scrim side against brown side. When sticking between plasterboard sheets, stick the brown side to the first board.
Important: The material itself remains flexible down to -20°C; however the adhesive backing on the self-adhesive version (SY50) will degrade if left in temperatures approaching zero