1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes. For more information
A vinyl type magnetic strip in an anodised aluminium holder which provides a very tight seal for door jambs and may also be used as a stop.
The optional 10x2.5mm 6011 insert is available in a brown, cream or maple PVC sleeve. The 6011 insert is supplied with an aggressive self-adhesive backing for fixing to timber doors.
Available in 1m (Part Code SE180) and 2100mm (Part Code SE190) lengths.
If you have a steel door then these are not usually required. If it is a timber door you must use these or alternatively purchase some mild steel strip from an ironmongery supplier and rebate that into the door face.
Fitting instructions for 6001 magnetic acoustic seal
A refrigeration type vinyl magnetic strip in an anodised aluminium housing, which provides a very tight seal for steel clad doors and jambs. It can also be used with timber doors if a rebate is made on the door face to accept the optional self-adhesive 6011 magnetic keeper strip. The magnetic strip has sufficient closing strength that latches may not be required. It can also be used in pairs on meeting stiles of timber doors as well as sliding doors.
Note: As a meeting stile seal, 6001 is not recommended for highly active doors. It is best suited for infrequent use or door closer hold open applications.
Location: Broad butt hinged doors for head, jambs or stiles. Can be used at meeting stiles for sliding doors.
Min/Max Gap: 4mm to 8mm (meeting stiles).
Standard Finish: Aluminium.
Seal Material: Flexible PVC charcoal.
Fixing Method: Zinc plated, cross recess head ST screws of the appropriate size are supplied.
(1) Measure door frame height/width and machine cut to suit.
NB. Machine cut mitred joints are recommended wherever possible. Before mitre cutting corner joints, ensure that seals will fix to jambs or door as specified.
(2) Although welded vinyl corner joints are ideal, lugs can be centre-punched to prevent vinyl magnetic seal from moving within the aluminium section.
(3) Lightly screw fix lengths to jamb/door using screws supplied (fixing holes are pre-drilled and slotted to allow seals to be accurately fitted and adjusted as required).
(4) Close door and adjust seal to ensure uniform seal around door, tighten fixing screws as required.