ATP2 Standard

 ATP2 standard render 1ATP2 standard render 2ATP2 standard parts

In order to make your choice easier, this ATP® pack has been created for small-sized home cinema rooms and home studios so that real acoustics can be obtained.

You can choose from the two available ATP2® solutions: Standard or Excellence, depending on your needs and aesthetic taste.

These examples of installation, ATP2®, place the acoustic treatment modules bearing in mind the distance between the listener and the speakers, while minimizing the SBIR (Speaker Boundary Interference Response) and the modal emphasis to produce a frequency response as flat as possible in the room. The ATP® 02 approach consists of adjusting the room dimensions to sizes which are slightly bigger than those of the ATP01

Give your ears a treat and see how the performance of your sound system improves.

All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.

Room Applications

  • Home theatre, Hi-Fi rooms or instrument rooms
  • Home studios, Small sized home theatre rooms

Where to apply

  • Rooms with an area between 13 and 17 square metres
  • Rooms with volumes between 35 and 45 cubic metres

Acoustic Characteristics

These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analysis of the rooms.

The simulated and tested rooms are totally empty, and only the referred ATP® acoustic panels are applied.

Construction used with the following characteristics:

Width: 3.58m
Length: 4.31m
Height: 2.80m

Walls: Masonry with painted plaster and a wooden door
Ceiling: 12mm thick plaster
Floor: Natural floating parquet

jocavi atp2 acoustic graph

ATP2 Standard
Product Unit Diffuser Absorber
Stripesorb 120 12 - Yes
Trap 30R or Trap 30S 120 8 - Yes
ATP2 Excellence
Wavyfuser 6 Yes  
Wavyfuser INV 6 Yes  
Foamsorb 6   Yes
Foamsorb INV 6   Yes
Trap 30R or Trap 30S 120 8   Yes

ATP2 excellence render 1 ATP2 excellence render 2 ATP2 excellence parts


There are no products to list in this category.
Custom Audio Designs - Soundproofing and Acoustics © 2017