ATP5 is a combination of acoustic panels designed for medium sized rooms which are generally the more common size of listening room.
You can choose from the two available ATP5® solutions: Standard or Excellence, depending on your needs and aesthetic taste.
This Acoustic Treatment Pack comprises a set of acoustic panels that are designed for large size music room. ATP 05 applies to every type ofmusic room, control room, recording studio, tracking room, cinema room etc. It provides an acoustic environment adequate for medium/large sized rooms.
This pack balances absorption and diffusion panels along with tuned low fequency units thus providing an excellent absorption to diffusion ratio. The application of the low frequency tuned absorbers in the corners and on the walls is essential in a room of this size.
Give your ears a treat and see how the performance of your sound system improves.
All packs are supplied with assembly instructions, as well as the glues and tools which are necessary to apply the acoustic modules.
Where to apply
These values were obtained by simulation in specific JAS® software and later confirmed through acoustic analysis of the rooms.
The simulated and tested rooms are totally empty, and only the referred ATP® acoustic panels are applied.
Construction used with the following characteristics:
Walls: Masonry with painted plaster and a wooden door
Ceiling: 12mm thick plaster
Floor: Natural floating parquet
|Trap 30R or Trap 30S 120||8||-||Yes||-|