1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes.
For more information click here
Prosonic FG Acoustic Panels have a rigid, acoustic-rated, high quality fibreglass core with a Class 1 or Class 0 fabric covering available in an extremely wide selection of colours.
These panels are an efficient, durable, cost-effective solution for reducing excessive reverberation in large spaces.
Units can also be custom made with hooks and wires for easy ceiling mounts or split battens for easy wall mounting which is ideal if you require them to be removable. See fixing methods listed below.
Available with a digitally printed fabric face. Virtually any image can be used as long as the aspect ratio is maintained and the resolution is high enough for the panel size. We require images with at least 300dpi with a similar aspect ratio to the panel you require. We print onto the white acoustically transparent fabric 'Adobo' From the Lucia Fabric range. We can also print a single image across multiple panels as can be seen in the following image:
96kg density fibreglass core, any size up to 2700 x 1200mm and any thickness in multiples of 25mm (Tolerance +/- 3mm).
Standard Unit Sizes:
As well as rectangular panels, we can also make square, round, triangular, circular or parallelogram shaped panels.
We can accommodate cutouts for light sockets, switches, odd angles etc. if required.
|When ordering panels please advise us if you need fixings. Panels are supplied without them unless specifically requested. Certain types need to be specified in advance. There will be an additional cost for supplying various clips, glues, chains, wires, battens etc. If you are unsure about what to use please contact our Technical Department.|
This method leaves virtually no gap between the panel and the wall (about 3mm). This system is available for 25 and 50mm thick panels. The battens come as a pair. One is pre-fixed to the panel the other slides off and is screwed to the wall. The panel is then lowered down in place. This option allows for the panels to be removeable.
|Metal Wall Spikes
Metal impaling clips are screwed into the wall.
Adhesive is applied to the panel and the wall.
The panel is then offered up against the wall spikes and fixed in place. This method does not allow easy removal of the panels.
For smaller panels spikes can be used without adhesive so the panels can be removed. However, this does not provide a permanent fix so would not be suitable in areas such as schools.
|Embedded 'L' Bars
This option allows very large, heavy panels to be hung from the ceiling at a pre-determined distance.
|Metal 'Z' Bars
This option allows very large, heavy panels to be hung close from the ceiling and is especially suited to sloped ceilings.
Probably the easiest and most versatile method of hanging from ceilings.
The hooks are simply screwed into the panel which can then be hung from chains.
Not generally recommended for large heavy panels.
The black backing scrim needs to be cut away before these fixings are screwed in. Contact our technical department for method and placement. This image is not to scale and fixings should not be close to the panel edges.
Ideal for fixing panels to a metal surface.
Ideal if you want the panels to be removable.
Can be used for walls or ceilings.
|Wire Suspension Kits
Complete with a 1.5m cable, gated hook end, and wire loop. Fully adjustable with the built in friction clutch
See examples of our Custom Printed Absorber panels on our