Features:
|
Applications:
|
PROSONIC FG ACOUSTIC PANELS are an efficient, durable and cost-effective solution for reducing excessive reverberation in large spaces.
They are made in a variety of shapes and sizes up to 2700mm x 1200mm as well as custom sizes on request. See below for size and shape guide.
They have a rigid, acoustic-rated fibreglass core with a Class 1 fabric covering as standard, available in a wide selection of colours. Class 0 fabric is available at additional cost.
Select from our standard fabric ranges - CARA - (Class1 FR) or LUCIA - (Class1 FR)
For panels suspended from the ceiling we supply a fully adjustable wire system with 2m cables and spiral springs.
For wall-mounted panels we supply spike plates and spray adhesive.
We offer two thickness options: 25mm which is Class C; and 40mm which is Class A. (The 25mm thickness is Class A with a 100mm suspension.) Other thicknesses are available on request however may have longer lead times.
CUSTOM PRINTING also available - CLICK HERE
Size
Any size up to 2700 x 1200mm
25mm, 40mm thicknesses (50, 75, 100mm+ available on request)
(Tolerance +/- 3mm).
Acoustic Performace
Fixing Options |
|
When ordering panels please advise us if you need fixings. Panels are supplied without them unless specifically requested. Certain types need to be specified in advance. There will be an additional cost for supplying various clips, glues, chains, wires, battens etc. If you are unsure about what to use please contact our Technical Department. |
|
![]() |
Wall Spike Installation
This method does not allow easy removal of the panels. For smaller panels spikes can be used without adhesive |
![]() |
Ceiling Mounting For ceiling mounting the panels are supplied complete with spiral hooks, and 2m cables with adjustable height clutch for each adjustment. The installation image to the left is not to scale and should only be used as a guide. The spiral hooks should be 200 – 300mm in from the panel edges (the larger the panels, the further in from the edge the hooks need to be) to prevent uneven load distribution which, over time, could cause the panels to bend. If the suspended wires are too close to the panel edge they will be clearly visible, as well as creating slight sagging. If in doubt contact our technical department. |
Technical Specification - Suspended Panels | |
Product | Prosonic FG acoustic Shapes |
Colour | Select from our Cara or Lucia ranges |
Weight | 3kg/m2 |
Thickness | 25mm standard (40mm optional) |
Fire rating | Class 0 core |
Finish | Fabric |
Absorption coefficients with 100mm suspension | ||||||||
Frequency | 125Hz | 250Hz | 500Hz | 1kHz | 2kHz | 4kHz | NRC | Class |
Alpha | 0.45 | 0.85 | 0.95 | 1.00 | 1.00 | 1.00 | 0.95 | A |
Other Options:
These items will increase lead times.
*not available on 40mm panels