1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes. For more information
A high specification, multi-perforated, galvanised, pre-lacquered acoustic panel with holes of different sizes. These panels are designed to reduce noise and reverberation problems in factories, plant rooms, workshops, test bays, sports halls, swimming pools and other industrial or sports type environments that require hard wearing surfaces. These panels are very durable and resistant to impact, as well as being simple and quick to install. All component parts of the system can be modified on site to suit easy installation.
These industrial noise control absorber panels are comprised of a 70kg/m³ mineral wool core, faced with a black film and then enclosed in an acoustic perforated steel tray sheet. This forms an acoustic panel which is both decorative and durable. All fixing channels are of light guage steel.
These panels allow you to obtain excellent sound reduction combined with a tough durable perforated steel finish. Ideally suited for use in factories, machine rooms, test areas, workshops, sports halls and swimming pools.
They can also be used externally against building façades. Some water can enter the panels, through the perforated face, in exposed external applications. This will not cause a problem but we suggest that in these situations the panels are only used vertically and small drainage holes are drilled into the bottom 'U' trims, one for each 350mm-wide section. This will allow any excess water to exit efficiently at the bottom.
Panels: 3000mm x 350mm or shorter 2500 x 350mm
U Channels: 3000mm in length
Absorption Class A when surface mounted
Light grey (similar to RAL 9002). White and other colours available subject to minimum orders.
B s1 d0 (Class 0) No. 07AN3255
Perforated metal panel facing can be cut using metal snips, and the insulation core with a sharp knife
Panels can be wiped with a clean cloth