ProSonic EcoTile Phonic - per box

ProSonic EcoTile Phonic - per box
Product Code: PEP
Quantity: Supplied in full boxes only
Options: Please select any combination of options below
Options: Supplied with no fixings, wall spikes or cables
Availability: In Stock
Price: £250.00

Available Options

EcoTile no fixings:

EcoTile with wall spikes:

EcoTiles with hanging wires:


ProSonic Echotile Phonic - Class A Acoustic Panel

EcoTile Phonic acoustic panels are supplied as standard in an arctic white speckled paint finish on all six sides giving a crisp visually attractive  appearance.

The panels can be fitted as individual stand-alone panels as a design  feature or can be butted together to form continuous wall linings. The perimeters of the panels are square edged.

These panels are not designed for impact resistance so are best placed either at higher wall levels or used on the ceilings. On walls the panels can be fitted vertically or horizontally, usually above door level out of touching reach.

The smallest 1200x600mm panels can also be suspended vertically, along the thin edge, as baffles, while all the panels can be installed horizontally as ceiling 'rafts' or 'clouds' using our wire fixing kits.

All panels are manufactured to dimensional tolerances of ± 3mm.

These panels can be emulsion spray painted on site to any colour with little significant effect on the acoustic performance. However, it is important that the paint is water based matt emulsion and only applied in a very light mist spray coat so that the acoustics are not significantly affected.

Colour White
Sizes 2400x1200mm rectangle (2 PER BOX)
  1200x1200mm square (4 PER BOX)
  1200x600mm rectangle (5 PER BOX)
  1200mm diameter circle (4 PER BOX)
  800mm diameter circle (4 PER BOX)
Fire rating Class 0
Weight Approx. 4kg/m2
Thickness 40mm
Finish Speckled paint
Absorption Class A



The panels can be fitted to walls with our spike fixings and optional adhesive.

For ceilings the panels can be suspended either vertically or horizontally using our fully adjustable wire suspension kits. For horizontal suspension the spiral hooks should be placed 200–300mm in from the panel edges.

We strongly recommend using white cotton gloves when handling and installing this product so the surface is not marked.

Panels up to 1200x1200mm require 4 suspension wires, anything larger will require 6 suspension wires.

For walls, panels up to 1200x1200mm require 2 spikes, anything larger will require 4 spikes.


Acoustic Absorption Data
Frequency, Hz 125 250 500 1k 2k 4k αw Class
Surface mounted 0.25 0.75 0.95 1.00 1.00 1.00 1.00 A
Vertical baffles spaced 600mm apart 0.35 0.30 0.65 0.85 0.85 0.85 0.60 C

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:

Noise Control Soundproofing and Acoustics © 2022
View Mobile / Standard