Features:
|
Applications:
|
Prosonic FG Acoustic Panels have a rigid, acoustic-rated, high quality fibreglass core with a Class 1 or Class 0 fabric covering available in an extremely wide selection of colours.
These panels are an efficient, durable, cost-effective solution for reducing excessive reverberation in large spaces.
Units can also be custom made with hooks and wires for easy ceiling mounts or split battens for easy wall mounting which is ideal if you require them to be removable. See fixing methods listed below.
Available with a digitally printed fabric face. Virtually any image can be used as long as the aspect ratio is maintained and the resolution is high enough for the panel size. We require images with at least 300dpi with a similar aspect ratio to the panel you require. We print onto the white acoustically transparent fabric 'Adobo' From the Lucia Fabric range. We can also print a single image across multiple panels as can be seen in the following image:
Size
96kg density fibreglass core, any size up to 2700 x 1200mm in 25mm or 40mm thickness (Tolerance +/- 3mm).
Standard Unit Sizes:
Acoustic Performance
Fixing Options | |
When ordering panels please advise us if you need fixings. Panels are supplied without them unless specifically requested. Certain types need to be specified in advance. There will be an additional cost for supplying various clips, glues, chains, wires, battens etc. If you are unsure about what to use please contact our Technical Department. | |
![]() |
Metal Wall Spikes Metal impaling clips are screwed into the wall. Adhesive is applied to the panel and the wall. The panel is then offered up against the wall spikes and fixed in place. This method does not allow easy removal of the panels. For smaller panels spikes can be used without adhesive so the panels can be removed. However, this does not provide a permanent fix so would not be suitable in areas such as schools. |
![]() |
Cloud Hooks Probably the easiest and most versatile method of hanging from ceilings. The hooks are simply screwed into the panel which can then be hung from chains. Not generally recommended for large heavy panels. The black backing scrim needs to be cut away before these fixings are screwed in. Contact our technical department for method and placement. This image is not to scale and fixings should not be close to the panel edges. |
![]() |
Wire Suspension Kits Complete with a 1.5m cable, gated hook end, and wire loop. Fully adjustable with the built in friction clutch |
See examples of our Custom Printed Absorber panels on our