Prosonic Acoustic Window Reveal Liners

Sound Absorbing Acoustic Window Reveal Liners

Introduction

Custom Audio Designs' Prosonic WRL sound absorbing acoustic window reveal liner system is a decorative and robust reveal liner for use in secondary glazing systems.

The WRL Window Reveal Liner provides a practical means of improving the sound insulation performance of secondary or tertiary glazed windows. Typically improvements of 2–4dB can be achieved using acoustic window reveal liners as long as the depth is adequate.

Their application to the reveals substantially reduces the reverberant sound field in the void formed between the primary and secondary glazing.

Traditionally reveal liners have been formed, on site, by cutting strips of material such as ceiling tiles. Not only does this present numerous practical problems and present a poor visual finish but acoustically they were extremely inefficient.

Description

• Superior sound absorption properties
• Made to measure (+/- 3mm)
• Wide colour range
• More suited to internal studio windows and low UV
• Maintenance-free
• Simple to fix

An absorptive core of rigid acoustic fibreglass with hardened edges, fabric wrapped around all the sides and top.
The acoustic core is faced with an acoustically transparent fabric. The full colour range can be seen here.
With no perforated metal facing the acoustic core can be 100 percent efficient.

Order a fabric sample card

Absorption Coeficients
Material / Hz	125	250	500	1000	2000	4000	NRC
25mm	0.14	0.24	0.69	1.00	1.00	0.92	0.73
50mm	0.29	0.76	1.00	1.00	1.00	0.95	0.94

 

Installation

These types are very lightweight and are generally friction fitted and held with adhesive. In some cases mechanical fixings, or angled sections, are required especially if the reveal is not uniform in width.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: