Vibration Isolation Pads

Speaker isolation pads using a soft low density synthetic polymer. Superior Sorbothane alternative. Designed to take loads of between 25kg – 100kg per pad.

Supplied as 100x100x25mm individual vibration isolation pads.

View List

Description

Vibration Isolation Pads

Vibration Isolation  pads are a synthetic polymer based material designed to take differing maximum loads, depending on type used. A superior acoustic grade Sorbothane alternative.

These isolation pads are ideal for lighter loads such as smaller machines.

They can be trimmed down in size to ‘tune’ for optimum loadings. For example a Type42 cut in half will accept 20kg per section.

They should not be point loaded. A UDL on them is required so in some cases a piece of timber or metal plate should be used to spread the point load over the whole surface of the pad.

Supplied as 100x100x25mm individual vibration isolation pads.

Types

Type28 (up to 25kg per pad)

Type42 (up to 40kg per pad)

Type55 (up to 50kg per pad)

Type110 (up to 100kg per pad)

Advantages
  • High elasticity, long service life
  • Static range of use of 0.011 N/mm2 to 1.2 N/mm2
  • Load peaks up to 6.0 N/mm2
  • Very low amplitude dependence
  • Proven long-term behaviour
  • High fatigue strength
  • Finely graded range (10 standard types) for optimum system design
  • Ability to provide customer-specific modifications

 

Type Max. Load per 100mm pad Capacity Natural Freq. Deflection
28 25kg 92% 14.3Hz 1.4mm
42 40kg 99% 12.2Hz 1.8mm
55 50kg 95% 12.5Hz 1.7mm
110 100kg 98% 11.9Hz 2mm

We have a couple of blog help articles that provide some further information on vibration isolation. They can be read from the links below:

Vibration Natural Frequency Explained

Vibration Isolation Principles

How to soundproof Industrial Machines