Prosonic FG Acoustic Panels

Size

Colour

Thickness

Fixing Method

Clear

Description

Features:

Available in standard and custom sizes
Wide range of Class1 and Class0 fabric colour finishes
Class 0 fire rated core
Acoustic class A, B, or C
25mm or 40mm thick
Durable
Cost-effective

Applications:

Often used to meet BB93 standards for reverberation control within schools.
Studios
Offices
Gymnasiums
Theatres
Auditoriums
Halls
Churches
BB93 solutions

They have a rigid, acoustic-rated fibreglass core with a Class 1 fabric covering as standard, available in a wide selection of colours. Class 0 fabric is available at additional cost.

Select from our standard fabric ranges – CARA – (Class1 FR) or LUCIA – (Class1 FR)

For panels suspended from the ceiling we supply a fully adjustable wire system with 2m cables and spiral springs.
For wall-mounted panels we supply spike plates and spray adhesive.

We offer two thickness options: 25mm which is Class C; and 40mm which is Class A.

Other Options:

Custom printing
Custom cut outs for lighting or other wall/ceiling furniture
Custom shapes (requires .dxf)

Fixing Options:

When ordering panels please advise us if you need fixings. Panels are supplied without them unless specifically requested. Certain types need to be specified in advance. There will be an additional cost for supplying various clips, glues, chains, wires, battens etc. If you are unsure about what to use please contact our Technical Department

Wall Spike Installation

Metal impaling clips are screwed into the wall.

Adhesive is applied to the panel and the wall.
The panel is then offered up against the wall spikes and fixed in place.

This method does not allow easy removal of the panels.

For smaller panels spikes can be used without adhesive so the panels can be removed. However, this does not provide a permanent fix so would not be suitable in areas such as schools.

Ceiling Mounting

For ceiling mounting the panels are supplied complete with spiral hooks, and 2m cables with adjustable height clutch for each adjustment.

The installation image to the left is not to scale and should only be used as a guide.

The spiral hooks should be 200 – 300mm in from the panel edges (the larger the panels, the further in from the edge the hooks need to be) to prevent uneven load distribution which, over time, could cause the panels to bend. If the suspended wires are too close to the panel edge they will be clearly visible, as well as creating slight sagging. If in doubt contact our technical department.

View more examples in our Projects Section

Prosonic FG Acoustic Panels

Description