1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes.
*FREE DELIVERY to London and other selected postcodes on selected items only on orders over £1000
For more information click here
Cavasinni Collection Newport Collection
Acoustek tiles are amongst the most efficient methods of combating reverberate noise, either planned from the outset as a design feature, or retrofitted as a cure for any previously unpredicted ‘noise annoyance factor’ - the latter being experienced in most commercial interiors. The control of reverberate noise in spaces where people work, relax, socialise and learn is of critical importance. ‘Reverberant spaces’ are not natural environments for humans. Spending time in such spaces can have a negative impact on productivity, learning, recuperation, enjoyment and well-being.
Acoustek has two exclusive acoustic tile ranges, the Newport Collection and Cavasinni Collection, both have been given the utmost consideration of where and how they will fit in to cure this all too common reverberate noise problem. The subtle and different design styles exhibited by both collections has something to suit most tastes, yet both collections also enable the expression of individual design flair to create decorative, effective, bespoke noise attenuation.
Acoustek 3D Tiles, Beams and Acoustic Screens are manufactured from thermally bonded polyester fibre with a minimum of 60% recycled fibre content from PET packaging such as empty drink bottles.
• Products with recycled content reduce greenhouse gas emissions.
• High reusable potential.
• The products are 100% recyclable.
• Volatile organic compounds (VOCs) generated in the manufacturing process is classified as low (0.01 mg/m3).
• No ozone-depleting gases are used during the manufacturing process.
• No red list chemicals are present.
• Safe, non-irritant, non-toxic, and non-allergenic.
|Weight||Less than 0.5kgs per tile|
|Thickness||35 - 55mm|
|Size||500mm x 500mm|
|Flash point||None allocated|
|Other properties||Non-allergenic, low irritant, low flame response, resilient|
|Composition||Organic, long chain synthetic polymers|
|Max service temp||110°C|
|Alkalinity||pH 7.8 (pH 7 is neutral)|
|Moisture absorption||Exposure to an atmosphere of 50ºC and 95% RH for four days gives moisture
absorption of less than 0.2% by volume
Acoustek wall tiles have the ‘designed in’ ability to incorporate acoustic wadding (if required) to further increase their NRC rating. Compare the graph enclosed, the standard black line shows excellent performance NRC of 0.70 = without wadding. Add wadding (the red graph line) and an NRC of 0.85 is achieved. It is important to qualify whether wadding is required or not since NRC of 0.70 is excellent noise attenuation across a broad spectrum frequency, the choice is yours.
Easy to use wall clip system. Screw the fixing plates into the wall and slot panels into fixing clips.
The images below illustrate fixing clips A, B & C and how they are situated in a basic 3x3 panel formation.
Have design freedom with our extensive range of fabric colours and finishes.
We recommend you order samples prior to placing an order as colour accuracy varies from monitor to monitor and we cannot be held responsible for colour discrepancies.