1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes.
For more information click here
High noise levels are not only harmful to human hearing but important instructions and emergency warnings can go unheard in the general commotion of noisy buildings. It is a proven fact that noise reduces productivity in the workplace and results in lack of concentration, irritation and higher stress levels.
This problem is recognised and minimum acoustic standards are set out for builders and designers of existing and new buildings. Buildings should comply with the acoustic standards set out by the British Standards Institute (BSI) and by the department for Education (DFEE). These tiles are also used in common hallways and corridors to absorb reverberant noise, as required in Building Regulations Approved Document E, for residential flats.
These tiles provide a simple and effective means of markedly increasing the sound absorption within rooms and halls resulting in lower sound levels to comply with these regulations. They are easily glued with our clear web-spray adhesive to the ceiling or wall surfaces so no special tradesmen are required, keeping installation costs to a minimum. The tiles can easily be cut with a sharp knife.
Melatech made of Basotect®, a melamine-based acoustic foam is a unique, flexible, open-cell foam, possessing a combination of low weight, a Class 0 fire specification and good sound absorption properties.
® = registered trade mark of BASF SE.
Produced from melamine resins, melamine foam exhibits superior fire, temperature and chemical resistance. Furthermore, being halide free, when exposed to either naked flame or extreme heat melamine foam does not emit any of the toxic by-products associated with conventional polyurethane based acoustic foams.
Clean gloves should be worn when installing white melamine foam.
|50mm Pyramid Profiled Melamine Foam|
|70mm Pyramid Profiled Melamine Foam|
|100mm Pyramid Profiled Melamine Foam|
|Size||1200x600mm and 1200x1200mm per tile|
|Thickness||50mm (standard), 70mm or 100mm|
|Flammability||Class 0, non-flammable BS476|