EcoMat RC5 Acoustic Rubber Cork Composite

Product Code: A412
Availability: Estimated 2-3 working days

Price: £120.00

Available Options

* EcoMat Thickness :

Qty: - OR - Add to Wish List
Add to Compare

0 reviews | Write a review

Description Reviews (0) Related Products (1)

EcoMat RC3 and EcoMat RC5 Acoustic Rubber Cork Composite Floor Covering Underlay
20m x 1m x 3/5mm

Suitable for:

Ceramic tile
Sheet vinyl
Stone floors
Wood
Parquet
Flotex
Marble
New build and refurbishment
Underfloor heating

Benefits:

Easy installation
High impact reduction
Remains continually elastic
Suitable under most substrates
Ultra thin
Good thermal properties
Part E compliant
Fully recycled

Recyclable image

EcoMat RC3 and EcoMat RC5

EcoMat RC3 and EcoMat RC5 acoustic matting is a Document E compliant resilient layer, suitable for use as acoustic matting under most floor finishes such as ceramic tile, stone, vinyl, wood, carpet etc.

The material is manufactured from waste rubber and cork which is mixed with a polymer binder to form a purpose made resilient acoustic matting which has exceptionally good insulating qualities.

The RC matting has been developed for use in both commercial and residential buildings such as apartments, hotels, hospitals etc. EcoMat RC3 and EcoMat RC5 has been developed to meet the current Building Regulations and is Document E compliant. It combines minimum build height with permanent resilience.

Acoustic performance

Impact Sound Insulation:

EcoMat 3mm Δ L_W18dB
EcoMat 5mm Δ L_W20dB

Measured in accordance with BS EN ISO 140-8 1998

Detail

EcoMat3 or EcoMat5 bonded to structural sub-floor
≥300kg/m² hollow core concrete planks with 80kg/m² sand/cement screed or proprietary screed
75mm void formed by metal frame suspended ceiling system
≥10kg/m² gypsum board ceiling

Detail

EcoMat3 or EcoMat5 bonded to structural sub-floor
≥300kg/m² cast in-situ concrete with 80kg/m² sand/cement screed or proprietary screed
75mm void formed by metal frame suspended ceiling system
≥10kg/m² gypsum board ceiling 75mm below underside of sub-floor supported under resilient bars at 400mm centres perpendicular to the battens

General physical data
Roll size	1m x 20m
Thickness	3mm or 5mm
Density	approx. 390kg/m³
Elongation at break	approx. 60%
Flammability	B2
Colour	Black/beige
Tensile strength	0.6N/mm²
Castor chair suitability	Yes
Service temperature	-30°C to +80°C
Heat conductivity	approx. 0.12 to 0.19 W/mk
Environmental	Limited resistance to acid
Coefficient of friction	AVR 0.66