Tilesorption dB-Tile Acoustic Suspended Ceiling Tile

Tilesorption dB-Tile Acoustic Suspended Ceiling Tile

USES

• Suspended lay in ceiling grid.
• Offices.
• Meeting Rooms.
• Schools.
• Can be used to meet BB93

BENEFITS

• Easy DIY Installation
• Performs far better than standard tiles
• Class 0 fire rated.
• Provides up to 39dB D_ncw
• Square edged.
• Only 15mm thick.

As the name suggests, Tilesorption dB-Tile is specifically designed to meet an optimum balance in sound performance, manufactured from bio-degradable mineral wool, organic binders and natural fillers.

dB-Tiles have been designed to optimise the balance between sound absorption and sound insulation. The fleece covered tile provides a pure white, sandy smooth finish.

The product is available in 600x600mm module sizes for Square edge T24 grids. Because of the close manufacturing tolerances the square edge tile may be used on both 24mm and 15mm wide grids.

Technical Data

Sizes
Square edge 600 x 600 x 15mm (nominal)

12 Tiles per box

General data

Composition: Produced from bio-degradable mineral wool, organic fillers and binders
Grid system: Exposed grid system
Edge detail: Square edge to suit 24mm or 15mm grid width
Thickness: 15mm nominal
Weight: Tiles approximately 6kg/m². Exposed grid system 1.5kg/m²
Surface patterns: Smooth sandy finish. Non-shedding
Colour: White
Light reflection: Approx 84%
 

Fire performance

Material classification: EN 13501-1, A2-s1, d0
BS476: Part 23 steel beams None
BS476: Part 21 timber floors None
BS476: Part 21 mezzanine floors None
 

Acoustic properties

Sound absorption NRC: 0.85
Sound absorption α_w: 0.85
Absorption: class B
Sound insulation: ( D_ncw) up to 33dB (Room to Room)
Sound insulation: ( D_ncw) up to 39dB (Room to Room with 100mm mineral fiber pads)
contact our technical department for guidance.

Relative humidity value

Approx 95%
 

Handling and Storage

Tilesorption should be stored flat in clean and dry conditions. Do not rest cartons or tiles on edges or ends
 

Installation

Installation should be in accordance with EN13964:2004