Masonry Isolation Strip - Wall Vibration Isolation
Soundproofing masonry acoustic isolation strips
MIS-5 and MIS-10
6mm and 10mm Masonry Isolation Strips: specifically designed to sit beneath blockwork walls and are a very simple and effective way to reduce structure-borne noise. Being rubber crumb, it has the benefit of longevity, minimal creep and is made from recycled material.
- Offers long term performance without failure under high load
- Resistant to ageing and deformation
- Easy to install simply bond to the subfloor beneath the blockwork
- Capable of withstanding loads up to 0.6N/mm² (60,000kg/m²) with low frequency isolation performance achieved
Versatility: Available in widths up to 1000mm
Size: Supplied in strips to special order. The standard width listed above is 100mm wide but we can do anything up to 1000mm wide. For different widths please contact us directly.
Installation: The base floor must be dry, clean, free of dirt and dust and flat. The strip can either be loose laid or bonded to the base floor.
|Max. temperature (C°)||>-40 to 115||-40 to 115|
|Fire resistance||>Class B2||Class B2||4102|
Write a reviewYour Name:
Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: