Categories
UK Delivery

 UK mainland 
1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes. For more information
click here

Acoustic Mineral Wool - Dense Fibre Matting

Acoustic Mineral Wool - Dense Fibre Matting
Product Code: R100 to R250
Availability: Estimated 5-10 working days
Download Description: For Registered Users Only
Price: £18.43

Available Options


* Acoustic Mineral Wool:

Qty:        
This product has a maximum quantity of 100

Acoustic Mineral Wool - Dense Fibre Matting

PLEASE NOTE:
Due to current national shortages, Acoustic Mineral Wool may be subject to extended lead times of a week +. 

 

Uses: Benefits:
  • Acoustic cavity infill between floor joists
  • Acoustic cavity infill between stud walls
  • Can be used to meet Part E (with other products)

  • Easy DIY installation
  • Airborne noise reduction through walls and floors
  • Low cost

22% is recycled material

Zero ODP and GWP

Fire-Safe acoustic mineral wool

acoustic mineral wool fire safe stone wool rocksilk This acoustic mineral wool (AMW) is particularly useful as a sound absorbing infill for the reduction of airborne noise in partition walls, between flooring joists and suspended ceilings. AMW consists mainly of silicon-oxide together with a number of other metallic oxides.

It is FAR MORE efficient for soundproofing purposes than lightweight thermal fibreglass loft insulation which should not be used in place of high density acoustic grade mineral wool. It is non-flammable and chemically inert and is not adversely affected by any substance it may normally come into contact with. Random arrangement of fibres ensures no water penetration in any direction. It is rot proof, non-hygroscopic, does not sustain vermin and will not encourage the growth of fungi, moulds or bacteria. It will not react with wired plastic or metal wall ties, brickwork or masonry.

Supplied as standard in three density grades:

Our 60kg/m³ is a performance acoustic grade version.
Our 45kg/m³ is a standard lesser performing lighter version.
We also offer a 140kg³ slab for specialist applications.

If you want to upgrade a ceiling to one-hour fire resistance without adding any extra plasterboard to the ceiling, then you can use rabbit wire mesh to hold the mineral wool between the joists to meet this requirement. The combination of the secured mineral wool sitting on the wire mesh, and the existing ceiling, is usually accepted by Building Control as being in compliance with the required fire resistance of a separating floor between flats. Usually the material is friction fitted tightly between the joists so you won't need any if working from above. However, it is sometimes useful to use it if working from below to prevent the material dropping back down before the plasterboard and bars are fitted.

Slabs manufactured to a higher density than 60kg/m³ are often referred to as Dense Fibre Matting or DFM. They can provide slightly improved acoustic control and come in 100kg/m³ and 140kg/m³ densities. This product costs approx. twice that of our 60kg version and should only really be considered for specialist applications as double the cost does not give twice the acoustic performance.

We also supply acoustic mineral wool in a wide range of other thicknesses and densities:
Thicknesses of 30, 40 and 60mm are also available subject to 5pack min. order.
Densities of 33kg/m³, 80kg/m³, 100kg/m³, 140kg/m³ and 200kg/m³ are also available subject to 5 pack min. order

PLEASE NOTE: When fitting mineral wool slabs between joists or between frameworks you won't need as much material as the total overall area because of:

a) the thickness of the joist or frame
b) the width of the joist or frame.
c) the spacings between.

The larger the area to be treated the fewer packs you will need: for a small area there will be little difference, but when you get to 100m² plus it will pay to make accurate calculations. As a generalisation, assuming the width of a frame to be 50mm at 600mm spacings, you would have approx. 8% in excess.

General Physical Data
Flammability: Non-combustible
Slab Size: 1200mm x 600mm
Thickesses: 25mm, 50mm, 75mm and 100mm
Weight (60kg grade):  
      50mm: 3.25kg/m²
      75mm: 4.75kg/m²
    100mm: 6.25kg/m²
Density: 60kg/m³ Premium Acoustic Grade
45kg/m³ Standard Grade
Thermal Conductivity: 0.034W/mK
Density Tolerance: Manufactured to BS 3958 Part 5 1986>

benefits of using acoustic rockwool slabs

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Custom Audio Designs - Soundproofing and Acoustics © 2017