For effective structural vibration isolation specific suspension mounts are required to prevent noise from speakers entering the structure. Usually speakers are directly connected via rigid brackets to walls or ceilings. This transmits high levels of vibrational energy into the structure which will then travel almost unhindered throughout a building.
Our ST Range of anti-vibration hangers can take loads from 5kg up to 60kg. Usually a minimum of 2 or 3 are used per speaker so to work within their designed deflection loadings the speaker needs to weigh at least 5kg (using two hangers). They provide a high degree of structure borne noise isolation, thanks to their low stiffness they are capable of achieving natural frequencies ranging from 3 to 4Hz.
The mounts are fixed to the ceiling using suitable screw/fixing or with a threaded rod (via the 6mm top hole and threaded nit provided) and the soft foam top needs to be compressed by about 3mm via tightening of the fixing. A threaded M6 rod is secured to the spring top housing and down to a suitable sidebeam or back plate fixed to the speaker body.
|Type||Max. permanent load (kg)||Weight (kg)|
The design of these acoustic hangers is composed of:
1-3 working days delivery for in stock items (unless stated otherwise on the product page); may be longer for rural postcodes.
For more information click here