Sylomer Acoustic Cradle Mounts

Sylomer® Acoustic Cradle Mounts

Sylomer® acoustic cradle floor mounts have been specifically designed for the isolation of timber batten flooring. The excellent properties of the microcellular polyurethane provides for increased levels of sound isolation, especially at lower frequencies, as opposed to the more common rubber, cork, foam and felt based cradles which never detail any specific deflection due to live or dead loads let alone natural frequencies. This maybe sufficient for a general domestic / residential application but for much more critical recording studio type applications where high mass, high isolation, low resonant timber floating floor systems are required then acoustic calculations need to be done and specific data on mount deflection and resonant frequency, due to live or dead loadings, is critical.

These mounts are manufactured in two special mixes and thicknesses of Sylomer® to better adapt to the loadings of each application.

The rugged metal parts can withstand tensile stresses and are supplied with an anti-corrosive treatment that can withstand the toughest environments.

They can also accommodate slight un-eveness of the subfloor as battens can be screwed onto the rigid side flanges with a small gap beneath. Designed for 50mm wide timber battens.

There are five options types:

Type	Summary	Max. load	Height	Code
Sylomer® 25 floor mount	floating floor batten system mount	25kg	27mm	23562
Sylomer® 30 floor mount	floating floor batten system mount	30kg	14.5mm	23561
Sylomer® 40 floor mount	floating floor batten system mount	40kg	27mm	23261
Sylomer® 75 floor mount	floating floor batten system mount	75kg	27mm	23564
Sylomer® 100 floor mount	floating floor batten system mount	100kg	14.5mm	23563

 

Natural frequency and deflection graphs are available on request. Generally, in certain combinations, natural frequencies as low as 10Hz can be achieved with deflections between 1-3mm. 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: